EN3
When you insert the battery, all the icon on the LCD display will briefly
light up for 3 seconds.
Manual time setting:
Press and hold “SET” for about 3 seconds and hour is flashing. Press
the “UP” or “DOWN” button to set the correct hour.
Press “SET” again to confirm your setting and the Minute is flashing.
Now use “UP” or “DOWN” buttons to set the correct minute.
Press “SET” again to confirm and end your setting and to enter the
clock mode.
In time mode，press “DOWN” button to set the 12/24 hour time display.
Notes:
After 30 seconds without pressing any button, the clock switches
automatically from Set Mode to Normal Time Mode.
To Next Page