EN4
In 12 hour time display mode, the symbol “PM” is displayed for afternoon
hours.
°C/°F temperature display:
The temperature is displayed either in °C or °F. Press the “SET” button
to switch between the °C or °F.
Hi/Lo temperature mode:
In time display mode，press the “UP” button for about 3 seconds to
switch to Hi /Lo temperature mode.
In Hi/Lo temperature mode，press the “UP” button for about 3 seconds
to switch to the time display mode.
Notes:
The value displayed under Hi is the maximum value measured by the
unit since the last initial operation or reset by removing batteries. Lo is the
To Next Page
Loading...
