EN5
minimum value measured during the same time.
Press and hold the “DOWN” button while in Hi /Lo temperature mode to
reset Hi/Lo memory.
IN/OUT temperature display:
The indoor temperature or outdoor temperature is displayed on the LCD.
Press the “UP” button allows you to switch between the individual models:
outdoor above and indoor below / outdoor below and indoor above
Precautions
Do not subject the unit to excessive force or shock.
Do not expose the unit to extreme temperatures, direct sunlight, dust
or humidity.
Do not immerse in water.
Avoid contact with any corrosive materials.
To Next Page
Loading...
Need help?
General
