EasyManua.ls Logo

Techno Line WT 189 - Page 5

Techno Line WT 189
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
▼ key to shift the position of “date” and “month”.
6. Press the TIME key again and the “month” digits will start flashing, press the ▲ or ▼ key to adjust
the month.
7. Press the TIME key again and the “date” digits will start flashing, press the ▲ or ▼ key to adjust the
date.
8. Press the TIME key again and then press the ▲ or ▼ key to set the time zone, e.g. when the country
time is faster than DCF time for 1 hour, the zone should be set to +1.
9. Press the TIME key again and then press the ▲ or ▼ key to choose the language for the Day of
week.
10. Press the TIME key again to return to normal display.
ALARMTING:
1. Press the ALARM key.
2. Press and hold the ALARM key for 3 seconds and the “minute” digits of alarm time will start flashing,
press ▲ or ▼ key to adjust the minute.
3. Press the ALARM key again and the “hour” digits of alarm time will start flashing, press ▲ or ▼ key
to adjust the hour.
4. Press the ALARM key again to return to alarm time display.
5. Press the ALARM ON/OFF key once to activate alarm on function and twice to activate snooze
function. Press the ALARM ON/OFF key once more, the alarm on function will be inactivated.
6. Press TIME key to return to normal display mode.
FUNCTION KEYS
SNOOZE/LIGHT KEY
-When the snooze alarm beeps, press the SNOOZE/LIGHT key to pause the alarm for 5 minutes and the
snooze function can be used repeatedly.
To stop snooze function, just press other keys once.
-Press the SNOOZE/LIGHT key to illuminate the LCD for 3 seconds.
C/F KEY
-In normal time display, press the C/F key to toggle between Celsius and Fahrenheit temperature
readings.
12/24 KEY
-In normal time display, press the 12/24 key to toggle between 12h and 24h display.
WAVE KEY
-In normal time display, press and hold the WAVE key for 3 seconds to activate the DCF scanning
function.
-If the clock is scanning for the DCF signal, press the WAVE key once to inactivate the DCF scanning
function.