WT536 Manual
EN6
Time zone setting (± 12h)
Manual time setting
Projection of the time
Date and weekday display (7 languages)
Temperature alternatively in °C or °F
Alarm and automatic snooze function
Indoor measurement range: -9.9°C ~ 49.9°C
Power: DC-adapter HX0180450150D2E (included),
battery 1.5V “AAA” LR03 size x 2 pcs (not included)
Initial operation
Connect the included power supply with the socket on the backside
Alternatively you can use batteries. Open the clocks battery compartment cover.
Insert 2 x AAA batteries observing polarity [ “+” and “ –“ marks].
When you insert the batteries, all icons on the LCD display will light up for 3 seconds, you
will hear a beep tone and the clock detects indoor temperature.
Then the clock will enter the radio controlled time signal reception mode.
Projection function:
Continuous projection is only possible by using the power adapter
Press the projection rotate button (below the "+" button) to turn the projection.
To Next Page
Loading...
Need help?
General
