WT536 Manual
EN10
and “-” buttons to set the month.
Press “SET” button to confirm your setting, the Date display starts to flash. Now use “+”
and “-” buttons to set the date.
Press “SET” button to confirm your setting, the language selection for the Weekday
displays starts to flash. Now use “+” and “-” buttons to select a language:
German, English, French, Italian, Spanish, Dutch, Danish
Press “SET” to confirm your setting and to end the setting procedures.
Please note:
After 20 seconds without pressing any button, the clock switches automatically from Set
Mode to Normal Time Mode.
Setting the daily alarms:
Please toggle the alarm switch to ON position, LCD display the “ ” icon, the alarm
function is ON, toggle the alarm switch to OFF position, the “ ” icon will disappears
from the display, the alarm function is OFF.
Press “ALARM” button once, to switch display to alarm time.
Press and hold “ALARM” button for 2 seconds until hour of the Alarm time starts to flash.
Use the “+” and “-” buttons to set the required hour.
Press “ALARM” button to confirm your setting, The Minute of the Alarm time starts to
flash. Use the “+” and “-” buttons to set the minute.
To Next Page