WT538 Manual
EN9
Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In
such extreme circumstances, place the system close to the window.
During the radio controlled clock signal receive mode, only the
"SNOOZE" and "WAVE" button function, other buttons have no function. If you want
to carry out other functions, please press “WAVE” button to stop the receiving mode.
Manual time setting
Press and hold down the “SET” button for 2 seconds, the 12/24 hour mode display starts
to flash. Now use “+” and “-” buttons to set the 12/24 hour mode.
Press “SET” button to confirm your setting, the Time zones start to flash, Now use “+” and
“-” buttons set the time zone (-12 to +12). For Germany the time zone is 0, for UK it is -1.
Press “SET” to confirm your setting, the hour display starts to flash. Now use “+” and “-”
buttons to set the hour.
Press “SET” to confirm your setting, the Minute displays starts to flash. Now use “+” and
“-” buttons to set the minute.
Press “SET” button to confirm your setting, the Month and Date icon display starts to
flash. Now use “+” and “-” buttons to set the date display on Month/Date or Date/Month.
Press “SET” button to confirm your setting, the Year display 2015 starts to flash. Now use
“+” and “-” buttons to set the year.
Press “SET” button to confirm your setting, the Month display starts to flash. Now use “+”
and “-” buttons to set the month.
To Next Page
Loading...
