For Support Visit· support.technocnc.com or Call: (631) 648-7481
21
HDS User Manual
(HTT06291133)
H-Spindle and Coolant Control
The section highlighted below allows manual control on the Spindle and Coolant.
BA
A-Spindle On/Off :
Pressing the button beside On will turn the spindle on, pressing the button beside Off
will turn the spindle off @ rpm of 6000.
B-AUX On/Off :
Pressing the button beside On will turn the coolant on, pressing the button beside Off
will turn the coolant off. (It will do nothing if the system does not have a coolant.)
To Next Page
Loading...