Delts Machine
12
C
B DD D
E
Lifting and moving the equipment
To facilitate passage through narrow doorways, transport and handling, it is possible to remove the seat:
- operate lever (B) and completely lower the seat (C);
- remove one of the three screws (D) and screw it into the hole behind the
tube (E) of the seat;
- remove the other screws (D) and remove the seat (C).
To reassemble the seat, carry out the above steps in reverse order. Keep seat (C)
pressed downward while removing screw (D) from behind the tube.
WARNING
During this operation do NOT operate lever (B).
To Next Page
Loading...
