Leg Curl 13
A
Lifting and moving the equipment
Snap-on castors (optional) must be used to move the equipment.
WARNINGS
Move the equipment very carefully, because it may become unstable and tip over.
Do not use the equipment with the castors tted. The castors are to be used only for
moving the equipment and must be removed before exercising on it.
The castors for moving the equipment snap on under the feet of the equipment, after
it has been raised, and are held in place by the special straps.
Raise the equipment on the weight stack side, using a pallet truck or fork-lift truck;
and for greater safety place a wedge under the frame to keep the equipment raised.
Insert the two xed castors rst on one side and then on the other side of the weight
stack: t castor stems (A) into the holes provided under the equipment feet, then push
hard until they snap in.
WARNINGS
We recommend placing padded material between the frame and the wedge and
between the frame and the machinery used to lift it.
The xed castors must always be placed underneath the weight stack.
To Next Page
Loading...
