Technogym SELECTION PRO - Adjusting the Cable Tension

Leg Curl 20
A
B
C
Adjusting the cable tension
Use the adjuster (C) to adjust the tension of the weight stack cable:
- loosen the locknut (B);
- tighten or loosen the adjuster (C) to correctly adjust the cable tension;
- tighten the locknut (B).
WARNING
To pull the cable taut after replacement, it may be helpful, when tightening the
screws (A), to insert a thickness of approx. 10 mm (1/2”) under the rst weight in
the weight stack.