Need help?Do you have a question about the Technogym Vario Excite + 500 and is the answer not in the manual?
Compares characteristics like power, consumption, and features across different VARIO models.
Provides detailed wiring diagrams for various VARIO models (500LED, 500SP, 700LED, 700SP, 700VISIO).
Describes the ARM board and C-Safe board used in LED displays for 500 and 700 models.
Details the CPU board and its connected components for VISIO displays.
Describes the brake board, its sections, indicator LEDs, and functions.
Lists prerequisites for correct machine installation, including surface and environment.
Step-by-step instructions for correctly installing the machine.
Describes the initial power-on procedure and checks for correct operation.
Troubleshooting steps for when the display does not illuminate on LED and SP models.
Troubleshooting guide for when the machine produces no resistance.
Troubleshooting guide for when the machine provides incorrect resistance.
Troubleshooting guide for an incorrect speed signal from the sensor.
Troubleshooting guide for when no heart rate signal is detected.
General| Type | Elliptical Trainer |
|---|---|
| Resistance Levels | 25 |
| Display Type | LED |
| Stride Length | 50 cm |
| Heart Rate Monitoring | Hand sensors |
| Power Supply | Mains |
To Next Page
