How to troubleshoot Technogym Excite Synchro that doesn't switch on?
If your Technogym Elliptical Trainer doesn't switch on, try these steps: First, check the power supply at the wall socket by plugging in a different appliance that you know works. Also, inspect the power supply cable connection to ensure it is properly connected. If these steps don't resolve the issue, it may indicate a more complex problem.
What to do if having problems monitoring heart rate with chest band on Technogym Excite Synchro Elliptical Trainer?
If you are experiencing issues monitoring your heart rate with the chest band on your Technogym Elliptical Trainer, consider the following: * Move the equipment away from other transmitters to prevent signal interference (maintain a minimum distance of 80 cm between units). * Identify and move away from strong interference sources, such as electrical appliances. * Ensure the chest band transmitter makes proper skin contact by dampening the inside of the band with water. * If the chest band is worn or the transmitter is damaged, replace the chest band.
What to do if data is incorrect on Technogym Elliptical Trainer?
If you find the data is incorrect or unreliable while your Technogym Elliptical Trainer is running, the issue might be due to the equipment being near a source of radio interference, such as electrical appliances. Try moving the equipment or the interfering appliances to another location.
Why is my Technogym Elliptical Trainer too noisy?
If your Technogym Elliptical Trainer is too noisy, the equipment might not be properly leveled. Check the position and level the adjustment feet.
General| Brand | Technogym |
|---|---|
| Model | Excite Synchro |
| Category | Elliptical Trainer |
| Language | English |
Controls all available functions, from setting up workout programs to viewing messages and related workout information.
Used for arm movements and may contain heart rate sensors and effort level controls.
Allows the user to change the effort level during exercise.
Located on levers and fixed handles for monitoring heart rate.
Troubleshooting steps for when the equipment fails to power on.
To Next Page