32
Synchro Excite
Recharging the battery (700 SP and 500 SP versions)
The 700 SP and 500 SP versions have to be kept moving to keep them
turned on. If, when you stop moving, the control panel switches off
without warning, the battery will have to be recharged.
If, 30 seconds after starting movement, the resistance of the equipment
is exceptionally high even at effort level 1, recharge the battery with the
charger.
Warning
Do not use the equipment while the battery is recharging.
Charger electrical specifications:
Input 100÷240 Vac 0,8 A 50/60 Hz
Output 15 V dc 24W
Class II
Warning
Only use devices that comply with applicable standards.
To Next Page
Loading...
