34
Synchro Excite
Troubleshooting
Problem Cause
Remedy
Too noisy Equipment not properly levelled.
Check the position and level the adjustment feet.
Damaged bearings.
Contact the Technogym Technical Support Service.
Worn belt.
Contact the Technogym Technical Support Service.
Data incorrect
or unreliable
with equipment running
Blocked key on keypad.
If the problem persists, contact the Technogym Technical Support Service.
Equipment next to source of radio interference (e.g. electrical domestic appliances).
Move the equipment to another place or move the domestic appliances.
An internal connector has become accidentally disconnected.
Contact the Technogym Technical Support Service.
Internal contact in control panel.
Contact the Technogym Technical Support Service.
To Next Page
Loading...
