TECHNOLIFT SL-9 - Product Features and Specifications; Clear-Floor Direct-Drive Model Features; Model SL-9 SL-9 H Specifications

1
I. PRODUCT FEATURES AND SPECIFICATIONS
CLEAR-FLOOR DIRECT-DRIVED MODEL FEATURES
Model SL-9 SL-9H(See Fig. 1)
· Direct-drived design, minimize the lift wear parts and breakdown ratio
· Dual hydraulic cylinders, designed and made as standards, utilizing oil seal in cylinder
· Self- lubricating UHMW Polyethylene sliders and bronze bush
· Single-point safety release, and dual safety design
. Clear-floor design, provide unobstructed floor use
. Overhead safety shut-off device prevents vehicle damage
· With 4pcs of 3-stages arms
. Standard adjustable heights accommodates varying ceiling heights
MODEL SL-9 SL-9H SPECIFICATIONS
Model Style
Lifting
Capacity
Lifting
Time
Lifting Height Overall Height
Overall
Width
Width
Between
Columns
Minimum
Pad Height
Motor
SL-9
Clear-floor
Direct-drived
4.0T
9,000 lbs
52S
1815-2044mm
71 1/2”–80 1/2”
3621/3821mm
142 1/2”-150 1/2”
3428mm
135”
2850mm
112 1/4”
90-319mm
3 1/2’’-12 1/2’’
2.0/3.0 HP
SL-9H
Clear-floor
Direct-drived
4.0T
9,000 lbs
52S
1815-2044mm
71 1/2”–80 1/2”
4231/4431 mm
166 1/2” -174 1/2”
3428mm
135”
2850mm
112 1/4”
90-319mm
3 1/2’’-12 1/2’’
2.0/3.0 HP
Fig. 1