TECHNOLIFT SL-9L - Parts Check Before Assembly

5
C. Check the parts before assembly.
1. Packaged lift and hydraulic power unit (
See Fig. 6).
Fig. 6
2. Move the lift aside with fork lift or hoist, and open the outer packing carefully, take off
the parts from upper and inside the column, take out the parts box, check the parts
according to the shipment parts list
(See Fig. 7).
Fig. 7
3. Loosen the screws of the upper package stand, take off the upper column and remove
the package stand.
4. Move aside the parts and check the parts according to the shipment parts list.
(See Fig. 8, Fig. 9).
Shipment Parts list
Floor cover
Parts box
42A
Fig. 9
Parts in the parts box (42A)
Fig. 8