4. The date digit will be flashing. Press the + key to set the date.
5. Confirm with the SET key and set the weekday.
6. Press + key to select the weekday, "MO", TU", "WE" etc.
7. Confirm with SET key and enter the “°C/°F TEMPERATURE UNIT SETTING” or exit
the setting mode by pressing the MIN/MAX key.
°C/°F TEMPERATURE UNIT SETTING
flashing
The default temperature reading is set to °C (Fahrenheit). To select °F (Celsius):
1. The “°F/ °C” will be flashing, use the + key to toggle between “°F” and “°C”.
2. Once the desired temperature unit has been chosen, confirm with the SET to exit the
setting mode.
17
To Next Page
Loading...
