EN14
If the base station cannot receive the outdoor values, "- -" appears on the display.
1. Check the batteries and try again. Note that you must always insert the batteries in
the transmitter and receiver within one minute for the restart.
2. Avoid close proximity to solid metal objects and other electrical devices (televisions,
computers, radio telephones).
3. Change the distance between the transmitter and receiver (free-field range max. 60
meters, with solid walls, especially with metal parts, the transmitter range can be
considerably reduced). If necessary, find a new location for the transmitter and/or re-
ceiver. "Visual contact between transmitter and receiver often improves the trans-
mission.
If the transmission was successful, the base station display shows the outdoor tempera-
ture.
4. Place the transmitter in a shady place protected from precipitation. Direct sunlight
falsifies the readings and constant wetness puts unnecessary strain on the electronic
components.
5. Fix the transmitter to the wall with the holder or stand it up.
6. Set up the base station.
Notes:
The outdoor sensor can work at -30°C to +70°C. Please choose the right battery ac-
cording to the limit temperature of the wireless sensor:
Alkaline zinc manganese batteries can work at -20°C to +60°C
Polymer lithium ion rechargeable batteries can work at -40°C to +70°C.
Reception strength symbol
Hint: The reception strength is influenced by many external factors and can fluctuate
greatly over time. To select the final location of the unit, the reception quality should
therefore be observed over a longer period of time.
- Optimum reception
- Good reception
- Poor reception
To Next Page
Loading...
