Technoline WS 6730 - Page 17

8
E.g. scanning failed at 8:20a.m., it will scan again at 9:00a.m.
 Stop scanning by holding “ ” button (B5) for 3 seconds.
 “DST” shown on the LCD if it is in Daylight Saving Time Mode
Note: “MODE/SET”(B1), “SNOOZE” (B2), “AL ON/OFF” (B3), “+/ (12/24)” (B4), “-/
“(B5) Buttons will not function while scanning for DCF time signal.
9.2 Manual Time Setting:
 Hold “MODE” button (B1) for 3 seconds to enter Clock/Calendar setting mode.
 Press “+” (B4) or “-” (B5) button to adjust the setting and press “MODE” button
(B1) to confirm each setting.
 The setting sequence is shown as follow: Hour, Minutes, Second, Year,
Month/Day sequence, Month, Day, Time Zone, Day-of-week language.
 8 languages can be selected in Day-of-week, they are: German, French, Spanish,
Italian, Dutch, Denmark, Russian, and English.
 The languages and their selected abbreviations for each day of the week are
shown in the following table.
Language
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
German, GE
SO
MO
DI
MI
DO
FR
SA
English, EN
SU
MO
TU
WE
TH
FR
SA
Russian, RU
BC
ПН
BT
CP
ЧТ
ПТ
СБ
Denmark, DA
SO
MA
TI
ON
TO
FR
LO
Dutch, NE
ZO
MA
DI
WO
DO
VR
ZA
Italian, IT
DO
LU
MA
ME
GI
VE
SA
Spanish, ES
DO
LU
MA
MI
JU
VI
SA
French, FR
DI
LU
MA
ME
JE
VE
SA
 The Time zone is used for the countries where can receive the DCF time signal
but the time zone is different from the German time.
 When the country time is faster than the German time for 1 hour, the zone
should be set to +1. Then the clock will automatically set 1 hour faster from the
signal time received.
Note:
(1) Second adjusted to zero only.
(2) The Time Setting Mode will automatically exit in 15 seconds without any
adjustment.
9.3 12/24 Hour Display mode:
Press “12/24” button (B4) to select 12 or 24 hours mode.