40
Setting the channel
Please select a different channel for the outdoor sensor by pressing the “▼”button on the weather station. The relevant
data is shown in the LC display:
- 1: Outdoor sensor channel 1
- 2: Outdoor sensor channel 2
- 3: Outdoor sensor channel 3
- : automatic channel change
Notes:
The channel switch on the backside of outdoor sensor sets the channel on which the outdoor sensor data are
transmitted.
Hold “▼” button for 3 seconds to receive transmission on the selected outdoor sensor channel manually.
Maximum/Minimum Temperature/Relative Humidity
To toggle indoor/outdoor maximum, minimum temperature and humidity data, press the “MEM” button:
Once to show the maximum temperature and humidity values.
Twice to sow the minimum temperature and humidity values
Three times to return to the current temperature and humidity levels
To Next Page
Loading...
