WS6650 Desktop Weather Station
Instruction Manual
Introduction
This desktop weather station comes with barometric weather prediction, clock, calendar,
indoor and outdoor temperature and humidity display. It is battery powered with AC
charger. It is recommended to use the AC charger at all times.
Fig. 1 Front view Fig. 2 Back view
1. SNOOZE/ LIGHT button
2. HISTORY button
3. MODE/ SET button
4. -/ RCC button
5. +/ C/ F button
6. CHANNEL button
7. MAX/ MIN button
8. Battery compartment
9. DC line in jack
General notes:
1. It is recommended to set up the remote temperature sensor before setting up the
weather station/ clock. See “Configuring Remote Temperature Sensor(s)”
for more information. Batteries and AC adapter should be used together.
2. Please note all other clock/ weather station settings seize to function when the
clock is in RCC synchronization mode. See “RCC Synchronization” for
additional information.
3. During initial installation, the temperature and humidity sensor may take up to an
hour or more to acclimatize to current conditions.
To Next Page
Loading...
Need help?
General
