Technoline WT265 - Daily Alarm Setting Procedure

WT265 Manual
flash. Now use “+” and “-“buttons to set the hour.
 Press “TIME” to confirm your setting, the minute displays starts
to flash. Now use “+” and “-“buttons to set the minute.
 Press “TIME” to confirm your setting, the date and month
symbols start to flash. Now use “+” and “-“buttons to set the
Date-Month or Month-Date as display option.
 Press “TIME” to confirm your setting, the year display 2016
starts to flash. Now use “+” and “-“ buttons to set the year.
 Press “TIME” to confirm your setting, the month display starts to
flash. Now use “+” and “-“ buttons to set the month.
 Press “TIME” to confirm your setting, the Date display starts to
flash. Now use “+” and “-“ buttons to set the date.
 Press “TIME” to confirm your setting and to end the setting
procedures, enter the clock mode.
Please note:
 If there is no valid operation within 30 seconds, the clock will
automatically return to normal time mode from the set mode.
Setting the daily alarm:
 Press and hold down the “ALARM” button for 2 seconds until the
alarm time is flashing.
 The Hour display of the Alarm time starts to flash. Use the “+”
and “-“buttons to set the hour. Press “ALARM” button to confirm
your setting
 The Minute display of the Alarm time starts to flash. Use the “+”
and “-“buttons to set the minute. Press “ALARM” button to
confirm your setting and to end the setting procedure.
 To activate or deactivate the daily alarms, press the “ALARM”
button once. When active, a bell icon is displayed.