Technomate TM-RF HD IR

Need help?

Do you have a question about the Technomate TM-RF HD IR and is the answer not in the manual?

Summary

Important Safety Instructions

Connections Overview

IR Transmitter Port

RF Output

Outputs the modulated RF signal to the TV for reception.

RF Input

USB Service Port

12 V DC Power Input

Connects the power adapter to supply electricity to the device.

Menu Settings and Configuration

Channel Number Setup

Sets the UHF channel number for signal transmission, avoiding conflicts.

RF Output dB Level

Installation Procedures

Basic Installation Steps

Connects device inputs/outputs and performs initial TV scan.

Using the 9 V IR Infra-Red Adapter

Setup for controlling source devices remotely via coaxial cable.

Advanced Installation: Watching on Multiple TVs

Explains setup for watching on multiple TVs using splitters.

Advanced Installation: Multiple HDMI Sources

Details cascading multiple modulators for more HDMI sources.

Connecting an Aerial System

Defining Channel Numbers on TV

Update and Configuration Management

Software Update Procedure

Steps to update the device's firmware via USB.

Cascaded Settings Upload

Procedure for uploading cascade configuration settings via USB.

Troubleshooting Common Issues

No Video;Audio or Channel Found

Guides on resolving issues with no video/audio or channel detection.

LCN Functionality Problems

Troubleshooting steps when the LCN feature is not functioning correctly.

Delay Time and Specifications

Technical Specifications

Details video, audio, modulator, and general technical parameters.