Software version 2.2.1_2015-02-21
-
8
-
• Microsoft® Windows™ XP / Vista / 7 / 8 Operating system
Recommended system requirements:
• Intel i3 Processor, 2 GB RAM
The Recognoil detection software must have these prerequisites pre-installed:
• Microsoft .NET Framework 4.0 (free for download at microsoft.com, you will be
noticed during the installation)
• 32-bit version – IDS uEye detector driver x86 (32)
• 64-bit version –IDS uEye detector driver x64
3.3.1. Detector driver installation
The installation must be executed „as Administrator“ i.e. by right-
clicking on the executable driver pack and choosing „Run as
Administrator“. This of course requires administrator privileges –
please contact your local network administrator in case of any
problems.
Insert the supplied USB Flash disc in a free USB port
1. At first, it is necessary to set up the detector driver, depending on your operating
system. Open the flash drive and find the “Drivers” directory. If your operating
system is:
• Windows XP - 32 bit
Execute the installation package „\Drivers\uEye32bit_45000.exe“
• Windows 7 or 8 - 32 bit
Execute the installation package „\Drivers\uEye32bit_45000.exe“
• Windows 7 or 8 - 64 bit
Execute the installation package „\Drivers\uEye64bit_45000.exe“
2. Follow the instructions:
• In the first step, you can choose either „English (United States)“ or the
German language.
• Now please click the button „Install Driver“
To Next Page
Loading...