techtron Elite 3500 - Display Panel Function

9
Display Panel Function
Speed display
The techtron® Elite 3500 foldable
eScooter is capable of a maximum speed
of 25km/h, with three pre-congured
factory default speed modes.
These presets can be changed via the
techtron® smart app (see page 12). The
app allows the user to set a pre-determined speed for each speed mode. The display
can also be congured to show speed in mph or km/h using the techtron® app.
Display panel button
To turn the eScooter ON/OFF, hold down the button on the main display panel for two
seconds. With a quick press of the same button, the user can toggle between the
device’s three-speed mode presets. The eScooter’s main light can also be turned
ON/OFF by a quick double press of the same button. Press the button three times
to display the total distance travelled, then press another three times to display your
speed again.
Cruise control
To activate cruise control mode press and hold the accelerator at the same speed
for ve seconds, the device will beep when the mode is activated. Cruise control will
deactivate when applying the brake.
Power saving
When not in use the techtron® eScooter will power down automatically after
15 minutes.
Factory default speed modes
Speed mode Maximum speed
1 10km/h
2 15 k m / h
3 25km/h