2. Function adjustment wheel (2) is not allowed to rotate when the machine is
running.
4. Adjustment of function adjustment wheel (2) requires rotating counter
clockwise the hand wheel (24) to lift the sewing needle (16) to the highest
position.
Texture-relative attentions:
1. The machine can’t provide ordinary sewing to elastic textures, such as towel
cloth, lint, elastic knitted fabric, etc.
2. Texture thickness recommended: 0.3mm-1.8mm.
Ordinary sewing
1.It requires accomplishing “preparation before operation” step by step described
in the instructions before sewing.
2.Different stitches of ordinary sewing can be selected by the function adjustment
wheel whose numbers are corresponding to the figure shown on functions
indication panel (3), enabling you to choose different stitches according to
different needs. Please refer to the following Figs for more information.
Straight sewing
It requires adjusting the function adjustment wheel (2) to function 1 . 2 or 3 for
straight sewing.
1. Rotate counter clockwise the hand wheel (24), shown in Fig1.
2. Rotate counter clockwise the hand wheel (24) to lift the pinpoint of sewing
needle (16) above the presser foot (17), shown in Fig2.
12
To Next Page
Loading...
Need help?
General
