Teckentrup CarTeck 12.1 - User Manual

Technische Änderungen vorbehalten TP-12.1-07/13
®
12.1
Typ 12.1_Seite.indd 1 29.11.2011 12:26:03
ED – KB 2 Min.
Schutzart IP20
-°C
+°C
KgKg
230V, 50/60 Hz. 21W/12V BS 15s max. 500 N max. 500 N ca. 14 cm/sek. min. 35 mm -20°C – +60°C ca. 12 kg
D
Einbau- und Bedienungsanleitung
Antriebssystem für Garagentore
Sehr geehrter Kunde, sollte bei Ihrem Antrieb eine Lichtschranke zum Einsatz kommen, ist folgendes zu beachten: Die Lichtschranke ist, bevor Sie mit
der Inbetriebnahme des Antriebs beginnen, in spannungslosem Zustand komplett zu installieren. Nach Einschalten der Netzspannung müssen Sie noch 5
Sekunden warten bis Sie mit der Programmierung beginnen können.
GB
Installation and Operating Instructions
Operator system for Garage Doors
Dear Customers, If your operator system uses a photocell, we would ask you to take the following into account: Before taking your operator system
into service for the first time, please fully install the photocell. Disconnect the photocell from the mains before beginning the installation work and ensure
that all potential electrical sources are eliminated during the work . After switching on the mains power supply, please wait for 5 seconds before starting
any programming.
F
Notice de montage et d‘utilisation
Opérateurs pour portes de garage
Cher client, Si vous utilisez une cellule photoélectrique avec votre opérateur, il vous faut observer les éléments suivants: La cellule photoélectrique doit
étre entiérement installée hors tension avant que vous ne commenciez avec la mise en marche de l‘opérateur. Aprés avoir activé la tension du secteur, vous
devez attendre encore 5 secondes jusqu‘à ce que vous puissiez commencer avec la programmation.
NL
Montage- en bedieningshandleiding
Aandrijfsysteem voor garagedeuren
Geachte klant, mocht u bij uw aandrijving een fotocel willen gebruiken, dan moet u het volgende in acht nemen: De fotocel moet , voordat u de
aandrijving in gebruik neemt, in spanningsloze toestand in zijn geheel worden geïnstalleerd. Na het inschakelen van de stroom moet u nog 5 seconden
wachten voordat u met de programmering kunt beginnen.
ES
I nstrucciones de montaje, manejo y mantenimiento
Accionamientos para puertas de techo
Estimado cliente,en caso de que utilize una barrera de luz hay que tener en cuenta lo sigiente: la barrera de luz hay que instalar completamente
ANTES de que se inicie con la programación del automatismo. Mientras que se instala la barrera de luz, hay que desconectar la tensión de alimentación.
Despues de haber instalado la barrera de luz y de conectado la tensión de alimentación, habrá que esperar alrededor de 5 secondos antes de que se
pueda comenzar con la programación del automatismo.
Seite 2–17Seite 18–33Seite 34–49Seite 50–65Seite 66–80
ES

Summary

Installation and Operating Instructions

Operator system for Garage Doors

Instructions for the automatic operation of garage doors.

General Safety

Important Safety Notice

Key safety instructions to be kept for future reference.

Operator Suitability and Installation Precautions

Guidelines on operator use, installation environment, and door mechanics.

Operator Usage Instructions

Guidance on safe and proper operation of the garage door system.

Maintenance Recommendations

Advice on regular inspection by a qualified technician.

Safe Installation Guidelines

Crucial steps for a safe and injury-free installation process.

Assembly and Mounting

Guide Rail Installation

Instructions for mounting the guide rail on the lintel or ceiling.

Door Mounting Alignment

Steps for correct alignment when mounting the operator to the door.

Mounting on the Door

Procedure for attaching the operator system to the garage door.

Emergency Release Attachment

Instructions on how to correctly attach the emergency release mechanism.

Middle Suspension for Guide Rails

Guidance on installing the middle suspension for stability.

Installing the Metal Stop

Procedure for attaching the metal stop to the rail before programming.

System Programming

Safety Before Programming

Crucial safety step: disconnect power before connecting modules.

LED Status Messages

Explanation of LED signals indicating system status.

Error Message Interpretation

Guide to understanding and resolving error messages.

Programming Travel Path

Setting the complete travel path of the garage door.

Setting End Positions

Programming the fully open and closed positions for the door.

Changing Direction of Motion

How to reverse the door's operational direction.

Confirming Programming and Learning

Finalizing programming and learning the door's operational data.

Programming Partial Opening

Steps to set a partial opening position for the door.

Programming Soft Start;Stop

Configuring soft start and stop functions for smoother operation.

Reverting to Factory Settings

Instructions to reset the system to its original factory configuration.

Remote Control and Testing

Antenna Adjustment

Guidance on adjusting the antenna for optimal signal reception.

Programming Operator Channels

Steps to program the 1st and 2nd channels for operator control.

Deleting Programmed Channels

Procedure to remove all previously programmed channels.

Checking Programmed Functions

Verifying that programmed functions operate correctly.

Testing Remote Signal

Procedure to test the remote signal functionality.

Guarantee Registration

Instructions for filling out the guarantee with purchase details.

Compliance and Overview

EC Declaration of Conformity

Statement of compliance with relevant EC directives and standards.

Included Parts List

Inventory of small parts included with the operator system.

Required Tools

List of tools necessary for installation and assembly.

Mounting Conditions

Environmental and structural conditions for proper installation.

Teckentrup CarTeck 12.1 Specifications

General

Brand	Teckentrup
Model	CarTeck 12.1
Category	Garage Door Opener
Language	English