Tecmen Freflow V3 - Technical Specifications

TECHNICAL SPECIFICATIONS
Optical Class:
Viewing Area:
Cartridge Size:
Arc Sensor:
Light State:
Grind State:
Cutting Shade:
Welding Shade:
Shade Control:
Power On / Off:
Sensitivity Control:
UV / IR Protection:
Power Supply:
Switching Time:
Grinding:
Delay (Dark to Light):
Low Amperage TIG Rated:
Operating Temp.:
Storing Temp.:
Helmet Material:
ADF Weight:
Application Range:
Approved:
1 / 1 / 1 / 1
107 x 75 mm (4.21" x 2.95")
156 x 123 x 33 mm (6.14" x 4.84" x 1.30")
4
DIN 3.5
DIN 4
Shade No. from 5 to 8
Shade No. from 9 to 13
Internal, Digital Display Control
Automatic On / Off
Low ~ High, Digital Display Control
Up to Shade DIN16 at all times
Solar cell. Battery replaceable,
2 × CR2450 lithium battery
1/25,000 s. from Light to Dark
Yes
0.1 ~ 1.0 s, Digital Display Control
≥ 2 amps (DC); ≥ 2 amps (AC)
-10 °C ~ +55 °C (14 °F ~ 131 °F)
-20 °C ~ +70 °C (- 4 °F ~ 158 °F)
High Impact Resistance Nylon
160 g
Stick Welding (SMAW); TIG DC∾ TIG Pulse DC;
TIG Pulse AC; MIG/MAG/CO2; MIG/MAG Pulse;
Plasma Arc Cutting (PAC); Plasma Arc Welding (PAW);
Air Carbon Arc Cutting (CAC-A); Oxyfuel Gas Welding
(OFW); Oxygen Cutting (OC); Grinding
DINplus, CE, ANSI Z87.1, CSA Z94.3, AS/NZS 1338.1
20