A complete Tecmen PAPR System includes a blower, filtration unit, breathing tube assembly,
battery, and a welding helmet with auto darkening filter.
The blower assembly draws surrounding air through its filter and supplies purified air to the
facial via a breathing tube. There are two levels airflow rate choice: Low speed—170+lpm;
High speed—210+lpm. Switch the airflow by short press Button. Warning lights allow you to
check the filter status. More warning lights turn on, more dirty it means. When warning lights
flash, please replace the filter.
DESCRIPTION & SPECIFICATION
BUTTON
FILTER
WARNING
BATTERY
INDICATOR
AIRFLOW
Indicator light refers to the airflow state. Two
different levels: Low Speed—170+lpm, High
Speed—210+lpm
Warning lights help to check the filter status.
More light spots turn on,more dirty it means.
When warning lights flash, pls. replace the
filter.
Display screen indicates the battery capacity.
Only Button controlling both Power
On/Off and Airflow switch
1.Power On/Off
On—Press and hold for 3 seconds.
Off—Press and hold for few seconds until
bleeping sounds finish.
2.Airflow switch
Press the Button to switch between
170+lpm and 210+lpm
2
To Next Page
Loading...