TECNA PROVASET 2P - PROVASET 2 P Programming and Configuration; Keyboard Controls and Navigation

PROVASET 2P code 2P2B00 - 2P6B00 - Instruction manual
rev. 14/02/2013
page 21
6 PROGRAMMING
6.1 Using the keyboard
Key [P
↵
] :
PROGRAMMING key to select the various menus (see picture 5) or, once you are
inside the menu, to return to the "Message menu".
This key is also used to confirm, after a change, the value of a parameter inside a
menu page.
Key [↑] :
ARROW UP key to scroll, inside a menu, the pages upwards and to go back to the
previous parameter inside a page.
Key [↓] :
ARROW DOWN key to scroll, inside a menu, the pages downwards and to go forward
to the next parameter inside a page.
Key [+] :
PLUS key to increase a numerical parameter or to answer positively to a question.
Key [-] :
MINUS key to decrease a numerical parameter or to answer negatively to a question.
NOTE: A parameter inside a page blinks if it has been modified but this change has
not been yet confirmed with button [P
↵
].
During a change in progress (blinking parameter), by pressing the [ ↑ ] or [ ↓ ]
keys you cancel the change.