EasyManua.ls Logo

TECNA PROVASET T3LPF - User Manual

Default Icon
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

INSTRUCTION MANUAL
Rev.20210610
Updated to fw 1.0.42


Represented By: GTEK AUTOMATION Lake Forest, CA 92630 Ph. 949-680-4242 www.gtek-automation.com
Question and Answer IconNeed help?

Do you have a question about the TECNA PROVASET T3LPF and is the answer not in the manual?

Summary

Risks and Warnings

General Information

Description

Provides an overview of the Provaset T3LPF device, its features, and capabilities.

Front panel

Describes and labels the components on the front panel of the Provaset T3L instrument.

Rear panel with mains power supply (90 ÷ 230 Vac)

Details the rear panel connectors and power supply for mains operation.

Expansion board

Describes the expansion board, including its 8 inputs/8 outputs (type IOB) and features.

Pneumatic installation, air supply and test connections

Guide to pneumatic installation, air supply, and test connection procedures.

Flow rate test: connection with remote pressure reading

Details the setup for flow rate tests using remote pressure measurement.

Flow rate test: connection with local pressure reading

Details the setup for flow rate tests using local pressure measurement.

User Information

Power on

Describes the instrument's power-on sequence and the initial display information.

Testing products and programs

Guides on selecting and managing products and test programs for instrument operation.

Products

Details on how to program, enable, and manage product configurations for testing.

Test programs

Information on selecting and configuring test programs for automated testing cycles.

Air flow rate: test cycle and parameters

Details the test cycle and parameters for air flow rate measurements.

Leak test: test cycle with test parameters

Details the test cycle and parameters for performing leak tests.

General test parameters

Covers general parameters applicable to all types of instrument testing.

Configuration Menu

Unit: instrument settings

Settings for product/program selection, front panel buttons, and test results.

Unit: USB device;slave interface

Configuration for USB communication protocols and device compatibility.

Unit: Ethernet (OPTION)

Configuration for Ethernet communication protocols for data collection.

Utility

Utility: calculation of the volumetric coefficient

Procedure for calculating the volumetric coefficient for leak tests.

Utility: Backup and Restore

Functions for backing up and restoring instrument configuration and data.

Collection of Test Data on the Pen Drive

Calibration of Pressure and Flow Sensors

Calibration of the relative pressure

Procedure for calibrating the relative pressure sensors.

Calibration of the zero relative pressure

Steps for setting the zero point for relative pressure calibration.

Calibration of the gain for the reading of the relative pressure

Steps for calibrating the gain (amplification) of relative pressure readings.

Flow sensor calibration

Procedure for calibrating the instrument's flow sensors.

Zero flow sensor calibration (offset)

Procedure for calibrating the zero offset of the flow sensor.

Flow sensor gain calibration (gain)

Procedure for calibrating the gain (amplification) of the flow sensor.

Firmware Update

Alarms

Technical Specifications

Technical data

Detailed technical specifications including power, fuses, environmental conditions, and ranges.

TECNA PROVASET T3LPF Specifications

General IconGeneral
BrandTECNA
ModelPROVASET T3LPF
CategoryTest Equipment
LanguageEnglish

Related product manuals