PROVASET T3LPF REV.20210610
66
Automation 2: maximum delay of limit switch FC1-Automation 2; Range 0: 3600.0 s;
0=not used, function disabled.
Automation 2: maximum delay of limit switch FC2-Automation 2; Range 0: 3600.0 s;
0=not used, function disabled.
Marking command duration, range 0 : 3600.0 s; 0=not used.
Choice of marking control:
PASSED: (only PASSED result),
FAILED: (only FAILED result),
ALL: (end of test signal).
6.7 Unit: USB device/slave interface
Communication protocol:
MODBUS For supervision and data collection with Modbus RTU network
CSV TEXT For data collection on terminal in CSV format
PC-PRINT For managing print formats (templates) (option)
DISABLED not used
USB device/slave interface manuals are provided on request.
USB interface enabled with Modbus RTU communication protocol; registers format:
T3 Standard version for Provaset T3 instruments.
DPxBx Compatible with DELTA DPxBx instruments.
DPxB2C Compatible with DELTA DPxB2C instruments.
DTxB01 Compatible with DELTA DTxB01 instruments
ISOxBx Compatibile with PROVASET ISOxBx instruments
Address of the Modbus RTU node for communication on the USB port; range 1:255
6.8 Unit: Ethernet (OPTION)
Ethernet communication protocol. Only selectable one at a time.
T3 MODBUS TCPIP o FOR SUPERVISION AND DATA COLLECTION WITH MODBUS TCP / IP
JSERVER o For data collection through jServer software (*)
Represented By: GTEK AUTOMATION Lake Forest, CA 92630 Ph. 949-680-4242 www.gtek-automation.com
To Next Page
Loading...