EasyManua.ls Logo

Tecnam P2002 JF - External Inspection

Tecnam P2002 JF
435 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page A06-8
Section 9 – Supplements
Supplement no. A06 – AFM Supplement for CIS Countries Operators
3
rd
Edition, Rev. 0
NORMAL OPERATION
PRE-FLIGHT INSPECTIONS
Before each flight, it is necessary to carry out a complete inspection of the air-
craft starting with an external inspection followed by an internal inspection as
below detailed.
EXTERNAL INSPECTION
To carry out the external inspection it will be necessary to follow the checklist
below with the station order outlined in fig. A06-1.
WARNING
Visual inspection is defined as follows: check for defects, cracks,
detachments, excessive play, unsafe or improper installation as
well as for general condition. For control surfaces, visual inspec-
tion also involves additional check for freedom of movement and
security.
FIG. A06-1

Table of Contents