10. POWERPLANT INSTRUMENTS MARKINGS
Powerplant instrument markings and their colour code significance are shown be-
low:
1
- Applicable for Engines up to serial no. 494543 (included) and repaired engine which doesn’t change the cyl-
inder head n°3 with new one (part no. 413195)
2
- In event of cold starting operation, it is permitted a maximum oil pressure of 7 bar for a short period.
3
- when fuel pump part no. 893110, 893114 and 893115 is installed
4
- when fuel pump part no. 893110, 893114 and 893115 is installed
5
- “0” indication shows the unusable fuel quantity (1.55 litres)
Section 2 - Limitations
1
st
Edition - Rev. 0