4.10.
AFTER LANDING
1.
Flaps: UP
2.
Electric Fuel Pump: OFF
3.
Landing light (if installed): OFF
4.11.
ENGINE SHUT DOWN
1.
Parking brake: engage
2.
Keep engine running at about 2900 rpm for about one minute in order toreduce
latent heat.
3.
Avionic equipment: OFF
4.
Magnetos: OFF, keys extracted
5.
Strobe light (if installed): OFF
6.
Master & Generator switches: OFF
7.
Fuel selector valve: OFF
4.12.
POSTFLIGHT CHECK
1.
Flight controls/surfaces: lock by means of gust lock (if available)
2.
Wheel chocks and wing mooring lines: Set (if available)
3.
Parking brake: release
4.
Doors: Close and lock
5.
Protection covers: install
To Next Page
Loading...
