TECNICOMAR SAILOR - User Manual

Instructions for the installation, use and maintenance of Tecnicomar watermaker
1-1
INSTRUCTIONS FOR THE INSTALLATION, USE AND MAINTENANCE OF
TECNICOMAR WATERMAKERS
Models
MINIMAR PLUS
SAILOR
BICOMPACT
NOTE
The indications contained in this Manual must be strictly followed during installation, operation and
maintenance of the watermaker in order to warrant the operators' safety and the equipment
maximum efficiency.
Identification
The Tecnicomar watermaker carries a plate with the following data:
a) Manufacturer: TECNICOMAR SpA, C/da Berbaro n.145/D – 91025 Marsala – ITALY –
Tel.0923-969409 / Fax 0923-960235;
b) CE logo;
c) Type
d) Serial number
e) Year of manufacture
f) Voltage
Revision
1
2009
Revision
2
07/2011
Revision
3
03/2012
Revision
4
03/2013
Revision
5
12/2014
Revision
6
08/2015
CONTROL BOX TINY2 DESCRIPTION UPDATED

Summary

INSTRUCTIONS FOR THE INSTALLATION, USE AND MAINTENANCE OF TECNICOMAR WATERMAKERS

2 Process description and system components identification

Watermaker System Sections

Describes the four main sections of the watermaker system and their functions.

3 Installation Procedure

3.2 Plumbing connections

Details the necessary plumbing connections for installing the watermaker.

3.3 Power connection

Provides instructions for connecting the watermaker's electrical power supply safely.

4 First Start-up procedure

4.1 Shut down procedure

4.2 TINY 2 microprocessor control box. Description and operation.

Explains the functions and display information of the TINY 2 control box.

5 Routine operation

5.1 Routine operation (c;w automatic pressure regulator device).

Details daily start-up and operation for units with an automatic pressure regulator.

5.2 Routine operation (c;w manual pressure regulator device).

Details daily start-up and operation for units with a manual pressure regulator.

5.4 Operation in low- or high-salinity areas

5.5 Operation in cold areas

6 Special procedures

6.2 Emergency operation.

Provides instructions for operating the watermaker in emergency situations.

6.3 Preservation of membrane modules in very cold areas.

7 Maintenance

7.1 Ordinary Maintenance

Covers routine maintenance activities for the watermaker system.

7.2 Extraordinary maintenance

7.3 Long-period shut down procedure

7.4 Membrane flushing with FL;411 A and FL;412 B chemicals

7.5 General maintenance plan

8 Common problems and troubleshooting

8.1 First start-up

Troubleshooting common problems encountered during the first start-up of the system.

8.2 Start-up after the replacement of filter cartridges

8.3 Low pressure failure

Diagnoses and resolves issues related to low pressure in the system.

8.4 Low pressure failure during normal operation

Troubleshooting low pressure issues that occur during regular operation.

8.5 Operation with vessel in navigation, rough sea and LOW PRESSURE alarm on

8.6 Normal operation of the watermaker and overload failure shutdown

8.7 UNSAFE warning message during normal operation

Resolves UNSAFE warnings, indicating potential issues with produced water quality.

8.8 The watermaker runs normally but the produced water does not reach the tanks

TECNICOMAR SAILOR Specifications

General

Type	Watermaker
Brand	TECNICOMAR
Model	SAILOR
Pre-filtration	Yes
Automatic Operation	Yes
Membrane Type	Reverse Osmosis
Dimensions	Varies depending on the model
Weight	Varies depending on the model