8
The appliance shall never be used in potentially explosive atmospheres.
Place the appliance away from heat sources or electromagnetic radiation.
Place the tool so that the control panel and the display are clearly visible by the
The electric system shall comply with the regulation in force, make sure the
system suits the appliance characteristics.
Open the lid and extract the accessories from the tank.
Position on a perfectly horizontal surface able to support loads of at least 35 kg. The
appliance supports are adjustable and allow for minor adjustment;
A wrong slope causes the deposit of a film of water on the tank bottom with
associated drying problems
Position the appliance so as to allow the operator to easily inspect and clean the tank; the
operator shall have access to the appliance rear panel for the filter cleaning.
For the drying phase air is taken from the rear side and hot
air is discharged from the device sides.
Let at least 50 mm clearance on both sides.
To Next Page
Loading...
