13
3
Heating
The device p
erforms a heating phase lasting 5
minutes and a first decontamination of tools.
If temperature is not achieved, heating continues
also during the washing phase.
5 min
1
4
LAMPEGGIANTE
Degas (DEGAS)
The device activates intermittent ultrasounds for
5 min
utes. This process reduces gases in the
fluid and improves effectiveness of the next
cleaning phase.
5 min
1
4S
PRESS START
TO CONTINUE
STANDBY
This new phase allows operating important
process as:
- Keeps the instruments in the washing liquid
(SOAKING)
- Add instruments
(ATTENTION: STEEL MAX 1 KG.)
TO EXIT THE STANDBY PHASE AND END
AUTOMATICALLY THE CYCLE IS
NECESSARY TO PRESS START.
5
Cleaning phase by means of ultrasonic
cavitation.
SWEEP
Ultrasounds undergo frequency modulation thus
reducing the negative effects of stationary
waves
and increasing distribution of ultrasonic
energy into the cleaning fluid.
Cleaning is more effective (cavitation is
improved)
1 min
to
30 min
6
Draining
The tank drains automatically
≈ 1.5 min
To Next Page
Loading...
