Tecno-gaz Multisteril Fast - Probe and Scheduled Maintenance

ENGLISH
20
9.5
Cleaning the level probe
Check periodically (every 2-3 cycles) the
PROBE J - Y
Clean the metal with products suitable for
stainless steel or a stripper.
Use a sponge (slightly abrasive).
9.6
Planned maintenance

Use exclusively original spare parts
Description
Interval
Operator
Replacement of the
peristaltic pump hose.
Yearly Authorized technicians
Drying fan check Yearly Authorized technicians
Tank filter
Whenever necessary
User
Detergent cap gasket
Whenever necessary
User
Lid gasket
Whenever necessary
Authorized technicians
Maintenance and repair operations shall be carried out after unplugging the machine
from power supply.
A correct maintenance of the device ensures its correct functioning as well as time and
service cost saving.
J - Y