process,other
than those recommended by the manufacturer.
*Warning:Do not use mechanical devices or other means to accelerate the defrosting
building in,clear of obstruction.
*Warning:Keep ventilation openings in the appliance enclosure or in the structure for
*Warning:Do not damage the refrigerant circuit.
*Warning:Do not use electrical appliances inside the food storage of the appliance.
Specifications
*Connection of power supply and installation should be conducted in accordance
with
the
from the manufacturer or its service agent.
*If the supply cord is damaged,it must be replaced by a supplied cord or assembly available
instructions in the operation manual.
*It is necessary to have the plug accessible after installation.
*Only the tools regulated by the manufacturer can be used for defrosting.
*The appliance has to be unplugged after use and before carrying out user maintenance
on the appliance .
*Do not store explosive substances such as aerosol cans with a flammable propellant in
this appliance.
be sure to observe the relevant norms and regulations.
*It is intended strictly for household use.If using it for industrial or commercial
p
u
rp
ose
,
*This appliance is designed for food refrigeration,ice making and frozen food storage.
*The refrigerating circuit is leak-proof.
sCaution
Version E1.0 of EN 03/2016 Page 5 of 14
EN
EN
Instructions
Instructions
for
food
storage
*Sto age
period
will
be
extended
if
vegetables
are
placed
with
their roots towards the cold source.
*Leaves
of
carrots
or
turnips
should
be
removed
before
storage.
*Put
a
wad
of
tissue
on
the
bottle
holder
before
placing
bottles
on
it
so that later
cleaning is easier.
*Onions, garlic, ginger, water chestnuts and
other
root
vegetables
should not be
stored in the refrigerator,as these foods
are
suitable
for
long-term
storage at
normal temperatures.
*Ripe squash, melon, papaw, bananas and pineapples should not be stored
in the refrigerator.Freezing will accelerate the ripening process.
Version E1.0 of EN 03/2016 Page 10 of 14
Instructions for heater switch
2
3
heater switch
The switch has the following ways:
In winter, when the room temperature is below 10 ℃ , to make the refrigerator achieve good
r
When you need fast cooling, set the switch to the "ON" position (with the "-" sign side down).
When the standard test refrigeration capacity, the switch must be placed in the "ON" position.
cooling effect, set the switch to "ON" position (with the "-" sign side down).
When the room
temperature is above 10 ℃,please dial the switch to the "OFF" position in time,so that it can
save energy.
s not required, set the switch to the "OFF" position.fast cooling i
To Next Page
Loading...