Need help?Do you have a question about the Tecnoalarm Tecnofire TFA2-596 and is the answer not in the manual?
Provides introductory information on system usage and purpose.
Details installer qualifications, environmental conditions, and usage guidelines.
Covers technical assistance and planning power supply for system autonomy.
Outlines essential precautions to avoid damage during installation or servicing.
Describes the control panel's display, LEDs, keys, and access control.
Explains monitored system mode, configuration methods, and network setup.
Details control panel networking, detection loop capacity, and device management.
Covers detectors, modules, telephone communicator, and repeater features.
Explains synoptic repeaters and how to connect additional power supplies.
Defines zones, virtual zones, formulas, and alarm plans for system logic.
Details programmable outputs, access periods, calendar, and PC/serial interfaces.
Covers event storage, filtering, and communication monitoring functions.
Details the control panel casing, its parts, and internal component layout.
Provides instructions for mounting the casing and selecting appropriate cables.
Ensures compliance with EN 60950-1 for electrical safety during installation.
Guides the installation and configuration of the secondary power supply system.
Describes the main control panel display, LEDs, and function keys.
Explains the system's access levels and the codes used to manage them.
Details the usage and operational sequences of the control panel's function keys.
Illustrates the meaning and signaling patterns of the control panel's LEDs.
Describes how to interpret different operating states displayed on the panel.
Details the event folders and methods for viewing stored events.
Explains how the system communicates its status through signals.
Provides a reference for understanding the icons used in the system interface.
Categorizes and describes system failures and their acknowledgment.
Lists common general failures and their automatic acknowledgment behavior.
Details the primary/secondary power supply components and safety protections.
Explains battery-only mode and provides technical power supply specifications.
Describes notifications for various power supply and battery-related failures.
Details notifications for battery charger issues and overvoltage conditions.
Explains notifications for low battery and discharged battery states.
Defines rules for zone configuration and types (fire, technical).
Illustrates single/double-knock fire zone behavior for alarms and prealarms.
Details how fire zones react after a prealarm condition expires or continues.
Illustrates single/double-knock technical zone behavior for alarms and prealarms.
Details how technical zones react after a prealarm condition expires or continues.
Explains activation, logic, and alarm handling in monitored system mode.
Details the terminal layout and protection features for the TFA2-596 board.
Covers all terminals, loops, buses, Ethernet, and power connections.
Details the terminal layout and protection features for the TFA4-1192 board.
Explains the CPU board, key jumpers for configuration, and interface ports.
Details the specific switching power supply unit and its characteristics.
Explains how to connect detection devices and modules to the control panel's loop.
Details the wiring and termination requirements for connecting sirens.
Explains RS485 port connections for expansion devices and networking.
Guides connecting TFPS-5 power supplies to TFA2-596 for extended autonomy.
Guides connecting TFPS-5 power supplies to TFA4-1192 for extended autonomy.
Details the connection of the telephone communicator module.
Explains the connection and configuration of the external Ethernet interface.
Details the terminal connections and configuration for repeater units.
General| Brand | Tecnoalarm |
|---|---|
| Model | Tecnofire TFA2-596 |
| Category | Fire Alarms |
| Language | English |
To Next Page
