Tecnoinox P-ONE - Page 2

VITE PER BLOCCAGGIO
2
1
STEP 5
- Fix the steel back components using n°4 screws self-
threading 3,5x13 TC/CR (Using holes in POS.4 of
DRAWING 2).
20825 BARLASSINA (MI) - via Machiavelli, 16
www.tecnoinoxsrl.it - info@tecnoinoxsrl.it
ASSEMBLY INSTRUCTION P-ONE
STEP 6
- Fix the front side panel and fix the steel back components using
screws (M4x25 TC/CR for steel back panel or M4x10 TC/CR for wood
back side panel).
STEP 7
- Put the drawer inside the cabinet and adjust the front side panel using
the standard settings of the drawer.
STEP 8
- Insert bottom components.