Produzido por Tecnomotor Eletrônica do Brasil S/A - REPRODUÇÃO PROIBIDA - Eventuais erros ou defeitos favor comunicar tecnomotor@tecnomotor.com.br
165
Problems/risks to be avoided
Test fluid
Before handling and supply the machine with test fluid, carefully read the MSDS
(Material Safety Data Sheet) and strictly follow all guidelines for handling, use
and first aid described in MSDS. Inform your Occupational Health and Safety
(OSH) manager that this product will be used in the work environment so that he
can make a technical assessment of the work environment in which the machine
will be installed, factors such as noise, ventilation and temperature.
The following example of MSDS that must accompany all chemical.
Gas inhalation
Heating the calibration fluid emits vapor and inhalation may cause poisoning. If it
occurs, move to a ventilated area and seek medical attention.
- Prevention
• If the work is done indoors, you should turn on the exhaust.
• If necessary, use safety masks.
• Always work with the closed safety cover.
To Next Page
Loading...