STARGAS _______________________________________________________________________________
38 OPERATING INSTRUCTIONS
11. File manager: To display the name of all files installed, with their size, date,
version and type.
12. Ambient temperature and humidity calibration: Function for the Technical
Service staff only.
13. System information: To display the tool system resources.
14. Printer selection: For a print test and to select the external printer (80 columns)
to be used.
15. Self test: To check some functions of the tool.
• Press the MENU key until the FUNCTIONS BAR display is disabled; or press ESC to
disable directly more levels of the FUNCTIONS BAR.
11
12
13
14
15
To Next Page