Need help?Do you have a question about the tecnotest STARGAS 898 LIGHT and is the answer not in the manual?
General| Lambda Calculation | Yes |
|---|---|
| Measurement Range (CO2) | 0-20% |
| Measurement Range (O2) | 0-25% |
| Resolution (NO/NOx) | 1 ppm |
| Gases Measured | CO, CO2, O2, NOx |
| Warm-up Time | Approx. 5 minutes |
| Measurement Range (NO) | 0-5000 ppm |
| Measurement Range (NOx) | 0-5000 ppm |
| Accuracy (CO) | ±0.06% vol |
| Accuracy (O2) | ±0.1% vol |
| Resolution (CO/CO2/O2) | 0.01% |
Essential precautions for working on vehicle engines and parts, including clothing and protective measures.
Guidelines for safe handling of vehicle batteries, acid, and explosive gases during operation.
Safety procedures for using equipment connected to the mains power supply, emphasizing earthing and avoiding wet conditions.
Detailed description of the front panel components and their functions on the STARGAS unit.
Detailed description of the rear panel ports and connectors on the STARGAS unit.
Specifies environmental and vehicle conditions required before performing tests with the STARGAS.
Guidance on using the temperature probe to measure oil temperature accurately during tests.
Instructions on how to use the internal revolution counter to measure engine RPM accurately.
Guide on operating the STARGAS unit using its keyboard for data entry and settings.
Instructions on how to effectively use the infrared remote control for STARGAS operations.
Procedures for inserting and removing the memory card for software updates and data storage.
Steps for changing the thermal printer paper roll on the STARGAS unit.
Procedure for cleaning or replacing the air filter to maintain optimal performance.
To Next Page