STARGAS _______________________________________________________________________________
28 OPERATING INSTRUCTIONS
FOR A CORRECT USE OF THE STARGAS
In order to use the STARGAS safely it is necessary to comply with the following rules:
• The tool must be used in dry places. Its exposure or use near sources of heat or
polluting emissions (stoves, ovens, etc...) must also be avoided.
• In order to connect the tool to the feeding mains make sure that the mains
voltage/frequency corresponds to the ones which are suggested for the tool.
• Do not expose the tool to shocks.
• Do not wet the tool with water or other liquids.
• Avoid to touch it with wet hands.
• Replace the burnt fuses with fuses having the same features.
• Do not lean objects on the supply cable and never bend it sharply.
To Next Page
Loading...