Tecnoware UPS ERA PLUS STRIP 800

Need help?

Do you have a question about the Tecnoware UPS ERA PLUS STRIP 800 and is the answer not in the manual?

Summary

Safety Warnings

General Safety Warnings

Comprehensive safety guidelines for installation and use, covering electrical hazards and operational precautions.

Introduction

Product Overview

Introduction to the ERA PLUS STRIP UPS as a Line Interactive UPS for computer protection.

General Characteristics

Key Features

Details advanced features ensuring reliability and safety, managed by a microprocessor.

Receipt and Site Selection

Installation Environment

Guidelines for selecting a suitable, protected, and well-ventilated installation location for the UPS.

External Description

UPS Cabinet Components

Identification and description of external components and ports on the UPS cabinet, including power and communication interfaces.

Leds and ON;OFF Button

Explanation of the function of the LINE, BATTERY, and FAULT LEDs, and the ON/OFF button.

Electrical Installation and First Start Up

Installation and Initial Setup

Step-by-step guide for connecting the UPS to the power line and performing the initial startup procedure.

Functioning

Normal Mode Operation

Details the UPS operation during normal AC power supply, including battery charging.

Battery Mode Operation

Explains UPS function during AC power loss, including battery mode and acoustic alarms.

Low Battery and Automatic Restart

Procedure for low battery warning, automatic shutdown, and restart after AC power recovery.

Load Control and Fault Conditions

Information on overload conditions, fault indications, and actions to take for each state.

Technical Characteristics

Specifications Overview

Detailed technical specifications of the UPS, including power, voltage, frequency, battery, and dimensions.

Maintenance

UPS Cleaning and Battery Care

Instructions for cleaning the UPS unit and general recommendations for battery maintenance and care.

Battery Replacement Procedure

Guidance for safe and correct battery replacement, emphasizing professional service.

Operator Safety Precautions

Crucial safety precautions for operators during battery replacement and general maintenance activities.

Troubleshooting

Common Anomalies and Solutions

Table listing common UPS anomalies, their possible causes, and recommended actions for resolution.

Conformity to European Directives

Product Disposal and Lead Batteries

Information on proper product disposal, environmental compliance, and handling of lead batteries.