TECO 28 Special - Gear Unit and Pressure Gauge Troubleshooting

User’s manual - TECO 28 special 27
Gear unit noisy. The table top makes 1/3 of a spin and then stops
Gear unit seizing.
- Replace gear unit.
Table top fails to clamp wheels
Table top does not clamp rim.
- Renew table top cylinder.
Table top mounts or demounts wheels with difficulty
Insufcient belt tension.
- Adjust tension or replace belt.
Tyre pressure gauge needle fails to return to 0
Pressure gauge faulty or damaged.
- Replace pressure gauge.
WARNING
The “Spare parts” handbook does not authorize users to carry out work on the machine
with the exception of those operations expressly described in the user manual. It only
enables users to provide the technical assistance service with precise information in order
to minimize delays.