EN - Operator’s manual 41
CHAPTER 2 - PRODUCT IDENTIFICATION
The identication data of the machine are shown in the label placed on the frame and
indicated in the declaration of conformity.
LOGO
Type: .....................................
Model: .....................................
Serial Number: .....................................
Year of Maufacturing: .....................................
Capacity: .....................................
Voltage: .....................................
Power: .....................................
Max. Pressure: .....................................
Use the above data both to order spare parts and when getting
in touch with the manufacturer (inquiry). The removal of this
label is strictly forbidden.
Machines may be updated or slightly modied from an aesthetic point of view and, as
a consequence, they may present different features from these shown, this without
prejudicing what has been described herein.
The warranty is valid for a period of 12 months starting from the date of the purchase
invoice.
The warranty will come immediately to an end when unauthorized modications to the
machine or parts of it are carried out.
The presence of defects in workmanship must be veried by the Manufacturer’s person-
nel in charge.
2.2 Technical servicing
For all servicing and maintenance operations not specied or shown in these instruc-
tions, contact your Dealer where the machine has been bought or the Manufacturer’s
Commercial Department.
To Next Page
Loading...